How to Use Woods Guard Pro Products
Simple steps for maximum protection against pests for every product in our lineup.
🦟 How to Use — Mosquito Killer Spray
Step 1 — Prepare the Area Close all doors and windows before spraying. Switch off fans and air conditioning. Remove food, utensils, and open water from the room.
Step 2 — Shake Well Shake the bottle thoroughly before every use to ensure proper mixing.
Step 3 — Apply the Spray Hold the bottle upright and spray in corners, under furniture, behind curtains, and near entry points like doors and windows.
Step 4 — Leave the Room After spraying, leave the room closed for 15-20 minutes for best results.
Step 5 — Ventilate Open windows and doors to air out the room before re-entering.
Step 6 — Reapply Reapply as needed. One spray provides up to 3 months of protection!
🦎 How to Use — Lizard Killer Spray
Step 1 — Identify Problem Areas Locate common lizard hiding spots — corners, behind furniture, near light fixtures, ceilings, and door frames.
Step 2 — Shake Well Shake the bottle well before every use.
Step 3 — Direct Application Spray directly onto lizards for immediate effect or apply in their common hiding areas.
Step 4 — Target Entry Points Spray along windows, doors, vents, and cracks for preventive protection.
Step 5 — Indoor & Outdoor Use Use in kitchens, storerooms, garages, balconies, and along exterior walls and fences.
Step 6 — Reapply Reapply every 7-10 days for continuous and effective protection.
🐛 How to Use — Termite Killer
Step 1 — Identify Infested Areas Locate termite entry points — wooden furniture, door frames, cabinets, walls, and floors.
Step 2 — Shake Well Shake the bottle thoroughly before use.
Step 3 — Apply with Free Syringe Use the free syringe included to inject the formula directly into termite holes and tunnels for deep penetration.
Step 4 — Spray Surrounding Areas Spray around wooden surfaces, skirting boards, and any cracks or crevices where termites may enter.
Step 5 — Allow to Absorb Let the formula sit and penetrate deep into the wood for maximum effectiveness.
Step 6 — Reapply Reapply every 7-10 days until the infestation is completely eliminated.
🛏️ How to Use — BedBug Killer
Step 1 — Prepare the Area Strip all bedding and wash in hot water. Vacuum mattress seams, bed frames, and corners. Dispose of vacuum contents immediately.
Step 2 — Shake Well Shake the bottle well before every use.
Step 3 — Apply the Spray Spray directly on:
- Mattress seams and folds
- Bed frames and joints
- Sofa edges and cushions
- Cracks, corners, and crevices
- Behind cupboards and furniture
Step 4 — Let it Dry Allow treated areas to dry completely for 2-3 hours before use.
Step 5 — Reapply Reapply every 7-14 days until bedbugs are completely eliminated.
🌿 How to Use — Plant Power & Care Spray
Step 1 — Shake Well Shake the bottle thoroughly before every use.
Step 2 — Apply on Plants Spray directly on leaves, stems, and surrounding soil of your plants.
Step 3 — Full Coverage Make sure to cover both upper and lower surfaces of leaves for maximum effectiveness.
Step 4 — Best Time to Spray Apply in early morning or late evening — avoid spraying under strong direct sunlight.
Step 5 — Reapply Repeat every 7-10 days or as needed for best results.
✅ General Pro Tips for All Products
- Wear protective gloves during application — free gloves included with every bottle!
- Keep children and pets away from treated areas until completely dry
- Store in a cool dry place away from direct sunlight after use
- Wash hands thoroughly with soap and water after every application
- Do not spray near food utensils or water containers
- Read the product label carefully before use for best and safest results
For more help or product specific questions visit our FAQs page or contact Woods Guard Pro support directly. 🛡️